Purpose: How to perform a Hard Reboot of the 3rd Eye Gateway Unit.
HARD REBOOT PROCESS:
- Obtain access to 3rd Eye Gateway Unit (Figure 1.1 or 1.2)
- Remove T20 Torx screw from security clip on power cable.
- Disconnect power plug from Gateway (Figure 1.1 or 1.2)
- Let rest for 45 seconds.
- Reconnect the POWER PLUG.
- Re-install security clip on power cable with T20 Torx bit.
- Start the vehicle completely (ENGINE RUNNING)
- Allow for 2-5 minutes for the WU to obtain a solid Orange (Network Connection) and Green light (GPS Connection) (Figure 1.3)
Figure 1.1
Figure 1.2
Figure 1.3